{"id":6012,"date":"2021-11-02T17:50:37","date_gmt":"2021-11-02T14:20:37","guid":{"rendered":"https:\/\/iranpadra.com\/introduction-types-of-power\/"},"modified":"2023-11-08T12:45:14","modified_gmt":"2023-11-08T09:15:14","slug":"introduction-types-of-power","status":"publish","type":"post","link":"https:\/\/iranpadra.com\/en\/introduction-types-of-power\/","title":{"rendered":"Introducing different types of laser device powersupply"},"content":{"rendered":"

To select the types of laser device power, we must pay attention to various parameters, which we will introduce in the following and select it.<\/p>\n

Types of laser device power models<\/h2>\n

Power 80 watt laser cutting machine<\/h3>\n

\"80<\/p>\n

This power model is suitable for use in 60 * 90 laser cutting machine with 80 watt tube and also can be installed for tubes with less power such as 60 watts and can be repaired in case of core failure.<\/p>\n

Other features include the following:<\/p>\n

    \n
  1. Can be used in tubes with lower powers such as 40 to 60 watts<\/li>\n
  2. Compatible with different tubes<\/li>\n<\/ol>\n

    An 80 watt power supply is usually used for very fine engraving, and if the tube is 100 watts and your power supply is 80 watts, your output beam is 80 watts.<\/p>\n

    Contact us for the price of 80 watt laser cutting machine.<\/p>\n

    Power supply 100 watt laser cutting machine<\/h3>\n

    \"100<\/p>\n

    This model is the most used “high voltage” power supply that can be installed on 130 x 90 devices with a 100 watt tube.<\/p>\n

    This model is a 100 watt power supply equipped with an adjusting screw for calibration, a voltage of about 30 kV and an amp of about 30 mA.
    \nThe 100 watt power supply, known as the DY13 power supply, has a rectifier model FH456, which delivers a highly filtered voltage to the head of the laser tube.
    \nIranPadra Company is always by your side by using experts. Do not replace your parts with us, but repair them.<\/p>\n

    Power supply 120 watt laser cutting machine<\/h3>\n

    \"120<\/p>\n

    Power supply of 120 watt laser device Model H (also known as Heinz power supplies in the market), models in the range of 100-80 or 120-100 have the most utilization and more dimensions and weight than DY10 or DY13 models. The components of these power supplies are of acceptable quality as well as long-term usability, which ensures that the laser tube is not damaged and provides optimal performance for the operator.<\/p>\n

    Important Note:<\/strong> To maintain the life of the tube and the power supply, for normal tubes from the normal power supply And use clay powers for clay tubes.<\/p>\n

    Power supply 130 watts laser cutting machine<\/h3>\n

    \"130<\/p>\n